Pages

Disclaimer

I write tut's as a guide line to make tags. I'm in no way saying mine is the right way, just the way I make a tag.
There are many ways to do all tags. I am just sharing my view of making the tag's I make... If you have a better way of doing a certain step, then by all means use your way. After all it is your tag centered around my tut... I would appreciate an occasional comment telling me what you think of the Tag, Tut, Kit, ect... This way I know what everyone likes and can improve... Thanks for understanding...
Please do not add your name or other words to the snags I post on my blog
****** ****** TOU ****** ******

My FTU Items are pretty easy, if you snag please give a link back if you use this in any tutorial or on a forum If you download one of my templates please leave some love, I enjoy seeing what others make out of them too...If you use my FTU items and i'm not on your fourm plz pm me on facebook so I can see what you do with them.. I may not be active but it's a nice thing to see others using them..

I am now making Kits so please read the TOU in each kit…I do not allow FTU Clusters unless your a fourm I have given Written permission to

In Love and Darkness
LadyDragus

Aug 21, 2017

Watermelon Fantasy

Watermelon Fantasy



This tutorial is written in Corel X5, but any version should work, it’s written in hopes you have working knowledge of Paint Shop Pro, or other graphics program…
This is written in hopes you have a working knowledge of Paint Shop Pro or other graphics program..


I am using a PTU kit
By Happy Pumpkin Studio
Called Melon Fantasy

You can find her kits
&

I am using the PTU artwork
Of Fiodorova Maria
You can find her work

Open a 725x725 size tag
Frame 4 c/p re-size by 85%
Frame 3 c/p pull behind other frame re-size by 80%...
Take your tube paste on top most layer re-size her by 35% pull to the middle of your frames…
E62 c/p re-size by 55% pull to bottom of tube c/p mirror pull even with other leaves…
E15 c/p re-size by 55% pull to the right hand edge of your frame…
E80 c/p re-size by 55% pull to the lower left hand edge of your tag..
E26 c/p re-size by 35% pull to the middle of white flowers…
E68 c/p re-size by 20% pull to lower left hand edge green leaves…
E18 c/p re-size by 35% pull to the upper right hand edge of your tag…
E3 c/p re-size by 20% pull to the middle edge of your tag…
E1 c/p re-szie by 20% pull to the left of 1st watermelon…
E94 c/p re-size by 35% pull to the far right hand edge of your tag…
E98 c/p re-size by 20% pull to the left of e94…
E83 c/p re-size by 55% pull to the middle of your tube…
E99 c/p re-size by 25% pull to the middle left of watermelons…
E33 c/p re-size by 25% pull to the right of icecream…
Go to bottom layer of your tag using your ellipse tool as a circle open paper 9 draw a circle behind the frames, make a raster layer, this is your background..
Now go back to top most layer of your tag and add a new raster layer add your copyright’s and credit for kit maker and a saying and your done…

Thank you for reading my tutorial…

©LadyDragus ~ August 2017

Dark Temptation

Dark Temptation



This tutorial is written in Corel X5 but any version should work, it’s written in hopes you have a working knowledge of Paint Shop Pro, or other graphics program.. This is written by me never meant to copy or look like other work..


I am using  a PTU tube
By Rebecca Sinz

You can find all of her artwork

I am using a PTU kit by Irish Princess Designs
Called Crimson Thorns

You can find her kits

I am using a FTU mask by Rachel (156-3)

Open a 725x725 size tag you can re-size down later

E9 c/p 4 times rotate 2 of them 90° to the right pull them to make a frame, merge them all into on raster layer…
Take your tube pull to the bottom edge of your frame 85%
E6 c/p pull to the bottom of your tube…
E27 c/p re-size by 60% pull to the bottom of your frame…
E26 c/p re-size by 15% pull to the far right of red flowers…
E38 c/p re-size by 60% pull to the far right hand edge of your tag…
E24 c/p re-size by 45% pull to the left hand edge of flowers…
E33 c/p re-size by 20% pull to sit on right of candle…
E32 c/p re-szie by 25% pull to sit on right of red cup…
E36 c/p re-size by 25% pull to far right hand edge of rose plant…
E35 c/p re-size by 15% pull to left of red cup…
E44 c/p re-size by 25% pull to sit by skull…
E94 c/p pull to the bottom edge of your tag…
E93 c/p re-size by 30% pull to the left of your tube…
E37 c/p re-size by 25% pull to sit on top of skull…
E31 c/p re-size by 25% pull to the bottom middle of your tag…
Go to bottom layer of your tag flood fill with paper 1 apply mask from above, or one of your choice…
Go back to top most layer of your tag add a new raster layer for your copyrights and credit to kit maker…

Thank you for reading my tutorial…
©LadyDragus ~ August~2017

Tag for mask maker



Aug 18, 2017

Relax

Relax


This tutorial is written in Corel X5, but any version should work, it’s written in hopes you have a working knowledge of Paint Shop Pro or other graphics program…
This is written by me never meant to copy or look like other work..

I am using a PTU kit
By Jenn’s Designs
Called Relax


You can find her kits
&

I am using the PTU artwork
Of Nocturne
You can find her work

I am using a FTU mask by Rachel (146-2)
  

Open a 700x700 size tag
E17 c/p leave as it falls on tag
E45 c/p re-size by 50% pull to the lower left side of frame…
E69 c/p re-size by 65% pull to the middle of white rocks…
E9 c/p re-size by 60% pull to cover the bottom of fountain…
E48 c/p re-size by 55% pull to the bottom of heart frame…
Take the tube c/p re-size by 35% pull to the lower right hand edge of your tag…
E2 c/p re-size by 35% pull to sit in front of left knee…
15 c/p re-size by 35% pull to the far right hand edge of your tube…
E28 c/p re-size by 25% pull to the left of other bottle…
E40 c/p re-size by 25% pull to left hand edge of tag…
E47 c/p re-size by 25% pull to sit by burlap bundle…
E30 c/p re-size by 35% pull to sit in middle of your tube on the “floor”
E6 c/p re-size by 50% pull to the left hand edge of tag…
E29 c/p re-size by 25% pull to sit on neck of far left bottle…
E3 c/p re-size by 20% pull to the left of far bottle..
E24 c/p re-size by 25% pull to the lower right of purple flower…
Go to bottom layer of your tag flood fill with paper8 apply mask from above merge it into one raster add a sharpen more and a drop shadow of your choice…
Now go back to the top most layer of your tag add a new raster layer add the copyrights and credit to kit maker and add a saying and your done…

Thank you for reading my Non CT tutorial.. Feels good to play with something different..
Thank you

©LadyDragus~ August 2017

Tag for kit maker and mask maker


Aug 17, 2017

Back To School Snags

Back to School Snags


Preview of kit 


•••❤• SHOP •❤•••
❤ News & Sales ❤
❤ Designer Scraps ❤
❤ Scraps N Company ❤
❤ Digi Divas ❤
❤ Wilma4Ever ❤
❤ Daelmans Designs ❤
❤ MyMemories ❤

I used a FTU tube 
By lysisange you can find all of her work

Here are the 2 sets of snags please do not alter them in anyway